COMPOSANTS POUR L’ECHANGE DE LA MATIERE
Hewitech développe des conceptions de produit adaptées au processus, hautement performants pour des garnissages structurés à la fois pour les installations d'absorption (laveurs chimiques & physiques) que pour les installations de désorption, les dénommées installations de stripage. En étroite collaboration avec nos clients, des réacteurs à lit percolateurs et des filtres biologiques ont été posés et installés.
Avec notre équipe nous préconisons une sélection de matériel à utiliser, ainsi que le conditionnement de l’emballage et l’efficacité d’un système de distribution de fluides.
Un processus de haute fiabilité est garantie grâce aux résistances à la pression élevées et à la conception spécifique de nos emballages garantissant une distribution régulière de fluide lors du chargement des liquides.
Avec notre équipe, nous proposons la sélection des matériaux à utiliser ainsi que le type exact de garnissage et les systèmes performants de distribution de liquide.
CF-27 Cross fluted film fill
Standard dimensions: |
2.400 x 320 x 300 / 600 (Length Width Height) Different dimensions are available upon request |
Channel opening: |
2 x 27 mm (simple wave height 27 mm) |
Effective surface area: |
125 m²/m³ |
Channel structure: |
Diagonal |
Material: |
Polypropylen (PP), Polyvinylchlorid (PVC) |
Operating temperatures: |
PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe ) |
Free volume: |
> 97 % |
Flammability rating: |
ASTM E 84, UL 94, DIN 4102-B2 |
Features
High-performance trickle fill installations are characterised by their high mechanical strength.
This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.The thick edges of the fill show significantly higher strengths compared to fills produced from a far outdated flat film construction.
The CF-19 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.
The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.
Due to the optimised fill design with a free volume > 97%, these fills can be used for contaminated water qualities.
Areas of application are cooling towers, agricultural and wastewater applications as well as highly-complex material exchanges.
Please contact us for the right type selection
Downloads
Features
- High flexibility according to installation situation
Variable dimensions and different strength classes
- Optimised heat and mass transfer
Large effective surfaces and therefore high efficiency
- High mechanical stability and high load bearing capacity.
Stable connection points and wall strengths ensure accessibility
- High durability
Use of age-resistant, effective materials
- Complies with the highest fire protection regulations
Own formula using highly effective additives