КОМПОНЕНТЫ ДЛЯ МАССООБМЕНА
Hewitech разрабатывает высокоэффективные дизайны продукции для структурированных загрузок, как для абсорбционного (химические и физические газоочистители), так и для десорбционного применения, в так называемых воздухоочистных установках. В тесном сотрудничестве с нашими клиентами были рассчитаны и установлены биофильтры и биоскрубберы.
Высокая безопасность процесса обеспечивается благодаря высокой прочности при сдавливании, специальным структурам наших загрузок и как результат – благодаря равномерному распределению жидкостей по разных нагрузках жидкостей.
Мы с нашей командой поможем сделать выбор применяемых материалов, а также правильно выбрать тип загрузок, и эффективные системы распределения жидкостей.
Продукция
Здесь Вы увидите нашу продукцию, которая применяется в массообмена.
CF-27 Cross fluted film fill
|
Standard dimensions: |
2.400 x 320 x 300 / 600 (Length Width Height) Different dimensions are available upon request |
|
Channel opening: |
2 x 27 mm (simple wave height 27 mm) |
|
Effective surface area: |
125 m²/m³ |
|
Channel structure: |
Diagonal |
|
Material: |
Polypropylen (PP), Polyvinylchlorid (PVC) |
|
Operating temperatures: |
PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe ) |
|
Free volume: |
> 97 % |
|
Flammability rating: |
ASTM E 84, UL 94, DIN 4102-B2 |
Features
High-performance trickle fill installations are characterised by their high mechanical strength.
This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.The thick edges of the fill show significantly higher strengths compared to fills produced from a far outdated flat film construction.
The CF-19 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.
The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.
Due to the optimised fill design with a free volume > 97%, these fills can be used for contaminated water qualities.
Areas of application are cooling towers, agricultural and wastewater applications as well as highly-complex material exchanges.
Please contact us for the right type selection
Downloads
Features
- High flexibility according to installation situation
Variable dimensions and different strength classes
- Optimised heat and mass transfer
Large effective surfaces and therefore high efficiency
- High mechanical stability and high load bearing capacity.
Stable connection points and wall strengths ensure accessibility
- High durability
Use of age-resistant, effective materials
- Complies with the highest fire protection regulations
Own formula using highly effective additives