CF-12 Cross fluted film fill

Standard dimensions:

2.400 x 300 x 300 / 600 (Length Width Height)  Different dimensions are available upon request

Channel opening:

2 x 12 mm (simple wave height 12 mm)

Effective surface area:

240 m²/m³

Channel structure:

Diagonal

Material:

Polypropylen (PP), Polyvinylchlorid (PVC) 

Operating temperatures:

PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe )

Free volume:

> 97 %

Flammability rating:

ASTM E 84, UL 94, DIN 4102-B2


Features

High-performance trickle fill installations are characterised by their high mechanical strength.

This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.The thick edges of the fill show significantly higher strengths compared to fills produced from a far outdated flat film construction.

The CF-12 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing (welding of up to 250 spot welds) through our own welding technology as well as adhering to every fire protection requirement.

This special type of fill can be supplied in two different design variants.

V (single directin change of air/water to an installation height of 600 mm) or

VV (tripple direction change of air/water to an installation height of 600 mm).

The welding machines which we developed enable us to process individual fills which are suitable for permanent use as well as on construction site production.

Due to the optimised fill design with a free volume > 97%, these fills can be used for very clean and slightly contaminated water qualities.

Areas of application are cooling towers, agricultural applications, wastewater applications as well as highly complex mass transfer processes.

Please contact us for the right type selection


Downloads

 Datasheet


Features

  • High flexibility according to installation situation
    Variable dimensions and different strength classes
     
  • Optimised heat and mass transfer
    Large effective surfaces and therefore high efficiency
     
  • High mechanical stability and high load bearing capacity.
    Stable connection points and wall strengths ensure accessibility
     
  • High durability
    Use of age-resistant, effective materials
     
  • Complies with the highest fire protection regulations
    Own formula using highly effective additives

Refroidissement

  • Grilles haute performance NC
  • Grilles haute performance VC
  • Corps de remplissage pour films CF
  • Composants d’installation à flux croisé
  • Séparateur de gouttes
  • Pulvérisateur pour tour de refroidissement

Eau de pluie

  • Série VARIO-Box
  • Série CONTROL-Box
  • Éléments de drainage
  • Sol à usage sportif
  • TREE-Box
  • Cartouches filtrantes

Purification de l’eau

  • Corps de remplissage pour films
  • Lits bactériens
  • Regard de curage
  • Clarificateur lamellaire
  • Ossatures porteuses
  • Systèmes de distribution d'eau

Culture agricole

  • Série COOLPAD
  • Elimination de poussière
  • Purification de l’air vicié
  • Éléments d'occultation
  • Série bio-grille