Produkty

Chłodzenie

VF-20 Vertical offset film fill

Standard dimensions:

2.400 x 310 x 300 / 600 (Length Width Height)  Different dimensions are available upon request

Channel opening:

2 x 20 mm

Effective surface area:

140 m²/m³

Channel structure:

Vertical, offset

Material:

Polypropylen (PP), Polyvinylchlorid (PVC)

Operating temperatures:

PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe )

Free volume:

> 97 %

Flammability rating:

ASTM E 84, UL 94, DIN 4102-B2


Features

High-performance trickle fill installations are characterised by their high mechanical strength.

This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.

The VF-20 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.

The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.

Due to the optimised fill design with a free volume > 97%, these fills can be used for very clean or slightly contaminated water qualities. Please contact us for the right type selection

 


Downloads

 Datasheet


Features

  • High flexibility according to installation situation
    Variable dimensions and different strength classes
     
  • Optimised heat and mass transfer
    Large effective surfaces and therefore high efficiency
     
  • High mechanical stability and high load bearing capacity.
    Stable connection points and wall strengths ensure accessibility
     
  • High durability
    Use of age-resistant, effective materials
     
  • Complies with the highest fire protection regulations
    Own formula using highly effective additives

 

Woda opadowa

VF-20 Vertical offset film fill

Standard dimensions:

2.400 x 310 x 300 / 600 (Length Width Height)  Different dimensions are available upon request

Channel opening:

2 x 20 mm

Effective surface area:

140 m²/m³

Channel structure:

Vertical, offset

Material:

Polypropylen (PP), Polyvinylchlorid (PVC)

Operating temperatures:

PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe )

Free volume:

> 97 %

Flammability rating:

ASTM E 84, UL 94, DIN 4102-B2


Features

High-performance trickle fill installations are characterised by their high mechanical strength.

This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.

The VF-20 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.

The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.

Due to the optimised fill design with a free volume > 97%, these fills can be used for very clean or slightly contaminated water qualities. Please contact us for the right type selection

 


Downloads

 Datasheet


Features

  • High flexibility according to installation situation
    Variable dimensions and different strength classes
     
  • Optimised heat and mass transfer
    Large effective surfaces and therefore high efficiency
     
  • High mechanical stability and high load bearing capacity.
    Stable connection points and wall strengths ensure accessibility
     
  • High durability
    Use of age-resistant, effective materials
     
  • Complies with the highest fire protection regulations
    Own formula using highly effective additives

 

Oczyszczanie wody

VF-20 Vertical offset film fill

Standard dimensions:

2.400 x 310 x 300 / 600 (Length Width Height)  Different dimensions are available upon request

Channel opening:

2 x 20 mm

Effective surface area:

140 m²/m³

Channel structure:

Vertical, offset

Material:

Polypropylen (PP), Polyvinylchlorid (PVC)

Operating temperatures:

PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe )

Free volume:

> 97 %

Flammability rating:

ASTM E 84, UL 94, DIN 4102-B2


Features

High-performance trickle fill installations are characterised by their high mechanical strength.

This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.

The VF-20 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.

The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.

Due to the optimised fill design with a free volume > 97%, these fills can be used for very clean or slightly contaminated water qualities. Please contact us for the right type selection

 


Downloads

 Datasheet


Features

  • High flexibility according to installation situation
    Variable dimensions and different strength classes
     
  • Optimised heat and mass transfer
    Large effective surfaces and therefore high efficiency
     
  • High mechanical stability and high load bearing capacity.
    Stable connection points and wall strengths ensure accessibility
     
  • High durability
    Use of age-resistant, effective materials
     
  • Complies with the highest fire protection regulations
    Own formula using highly effective additives

 

Wymiana mas

VF-20 Vertical offset film fill

Standard dimensions:

2.400 x 310 x 300 / 600 (Length Width Height)  Different dimensions are available upon request

Channel opening:

2 x 20 mm

Effective surface area:

140 m²/m³

Channel structure:

Vertical, offset

Material:

Polypropylen (PP), Polyvinylchlorid (PVC)

Operating temperatures:

PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe )

Free volume:

> 97 %

Flammability rating:

ASTM E 84, UL 94, DIN 4102-B2


Features

High-performance trickle fill installations are characterised by their high mechanical strength.

This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.

The VF-20 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.

The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.

Due to the optimised fill design with a free volume > 97%, these fills can be used for very clean or slightly contaminated water qualities. Please contact us for the right type selection

 


Downloads

 Datasheet


Features

  • High flexibility according to installation situation
    Variable dimensions and different strength classes
     
  • Optimised heat and mass transfer
    Large effective surfaces and therefore high efficiency
     
  • High mechanical stability and high load bearing capacity.
    Stable connection points and wall strengths ensure accessibility
     
  • High durability
    Use of age-resistant, effective materials
     
  • Complies with the highest fire protection regulations
    Own formula using highly effective additives

 

Rolnictwo

VF-20 Vertical offset film fill

Standard dimensions:

2.400 x 310 x 300 / 600 (Length Width Height)  Different dimensions are available upon request

Channel opening:

2 x 20 mm

Effective surface area:

140 m²/m³

Channel structure:

Vertical, offset

Material:

Polypropylen (PP), Polyvinylchlorid (PVC)

Operating temperatures:

PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe )

Free volume:

> 97 %

Flammability rating:

ASTM E 84, UL 94, DIN 4102-B2


Features

High-performance trickle fill installations are characterised by their high mechanical strength.

This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.

The VF-20 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.

The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.

Due to the optimised fill design with a free volume > 97%, these fills can be used for very clean or slightly contaminated water qualities. Please contact us for the right type selection

 


Downloads

 Datasheet


Features

  • High flexibility according to installation situation
    Variable dimensions and different strength classes
     
  • Optimised heat and mass transfer
    Large effective surfaces and therefore high efficiency
     
  • High mechanical stability and high load bearing capacity.
    Stable connection points and wall strengths ensure accessibility
     
  • High durability
    Use of age-resistant, effective materials
     
  • Complies with the highest fire protection regulations
    Own formula using highly effective additives

 

Oczyszczanie powietrza

VF-20 Vertical offset film fill

Standard dimensions:

2.400 x 310 x 300 / 600 (Length Width Height)  Different dimensions are available upon request

Channel opening:

2 x 20 mm

Effective surface area:

140 m²/m³

Channel structure:

Vertical, offset

Material:

Polypropylen (PP), Polyvinylchlorid (PVC)

Operating temperatures:

PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe )

Free volume:

> 97 %

Flammability rating:

ASTM E 84, UL 94, DIN 4102-B2


Features

High-performance trickle fill installations are characterised by their high mechanical strength.

This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.

The VF-20 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.

The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.

Due to the optimised fill design with a free volume > 97%, these fills can be used for very clean or slightly contaminated water qualities. Please contact us for the right type selection

 


Downloads

 Datasheet


Features

  • High flexibility according to installation situation
    Variable dimensions and different strength classes
     
  • Optimised heat and mass transfer
    Large effective surfaces and therefore high efficiency
     
  • High mechanical stability and high load bearing capacity.
    Stable connection points and wall strengths ensure accessibility
     
  • High durability
    Use of age-resistant, effective materials
     
  • Complies with the highest fire protection regulations
    Own formula using highly effective additives

 

Chłodzenie

  • Wysokowydajne wypełnienia siatkowe NC
  • Wysokowydajne wypełnienia siatkowe VC
  • Wypełnienia foliowe krzyżowo-kanałowe CF
  • Wypełnienia do chłodni krzyżowo-prądowych
  • Odkraplacze i eliminatory unosu kropel
  • Zespoły rozpryskowe

Woda opadowa

  • Seria skrzynek rozsączających VARIO
  • Seria skrzynek rozsączających CONTROL
  • Elementy drenażowe
  • Boiska sportowe
  • Skrzynki TREE
  • Kasety filtracyjne

Oczyszczanie wody

  • Wypełnienia foliowe
  • Złoża zraszane
  • Szybiki czyszczące
  • Oczyszczacze lamelowe
  • Konstrukcje nośne
  • Układy rozprowadzania wody

Rolnictwo

  • Seria COOLPAD
  • Separatory pyłu
  • Czyszczenie powietrza odlotowego
  • Elementy zaciemniające
  • Seria siatek biodegradowalnych