VC 25 Trickle grid

Standard dimensions:

910 x 610 x H: 450 (Length Width Height)  Different dimensions are available upon request

Channel opening: 

2 x 25 (simple wave height 25 mm)

Effective surface area:

~100 m²/m³

Channel structure:

Vertical offset

Material:

Polypropylene (PP) oder High-Desity Polyethylen (HDPE) 

Operating temperatures:  

< 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe )

Free volume:

> 97 %

Flammability rating:

ASTM E 84, UL 94, DIN 4102-B2, DIN 4102-B1, M2


Features

High-performance trickle fill installations allow a completely new way of thinking about the design of film installations. The plastic is used only where it really makes sense - not a water-scarce areas - also a water film which flows around both sides - combined with droplet cleansing and thus the highest cooling interface.

High thermal performance (through water film formation) at the lowest pressure loss (less than vertical offset channel).The material thickness of 1.5-2 mm is many times higher than fill inserts.

Particular attention is paid to environmental compatibility (solvent-free), simple and fast mechanical processing by means of patented assembly technology. In addition, every local fire protection requirement is strictly adhered to.

The machines which we developed for processing single lattices are suitable for permanent use as well as for deployment on construction sites under weather protected conditions.

Due to the open vertical-offset grid structure with a free volume of > 97%, these trickle fill installations are particularly suitable for contaminated as well as highly polluted water quality.

Areas of application are cooling towers, agricultural and exhaust air applications.

Please contact us for the right type selection


Downloads

 Datasheet


Features

  • High flexibility according to installation situation
    Variable dimensions and different strength classes
     
  • Optimised heat and mass transfer
    Open cross structure generates high turbulence and consequently performance
     
  • High mechanical stability and high load bearing capacity.
    Permanent connection points and wall strengths ensure accessibility
     
  • High durability
    Use of age-resistant, effective materials
     
  • Complies with the highest fire protection regulations
    Own formulas with use of highly effective additives

CHLAZENÍ

  • Modulární rozstřiková výplň NC
  • Modulární rozstřiková výplň VC
  • Výplně typu FILM
  • Křížoproudé aplikace
  • Eliminátory kapek
  • Trysky

DEŠŤOVÁ VODA

  • Série VARIO Box
  • Série CONTROL Box
  • Odvodňění
  • Odvodnění sportovní povrchy
  • Kořenové boxy
  • Zasakovací boxy

ZEMĚDĚLSTVÍ

  • Produkty COOLPAD
  • Odprášení
  • Čištění odpadního vzduchu
  • Clony
  • Skrápěné filtry